How to make a Winch Ground Anchor? – [Detailed Guide]

When we first bought a winch, it may not have occurred to us that there would be times when we would be stuck without an anchor point insight. Alternatively, we may have heard such horrible reports from first-hand witnesses.

There are several situations where you may not even need to consider not having a winch anchor on hand for rescue operations.

People in sandy and snowy environments, on the other hand, must consider the possibility of becoming trapped in isolated locations with no one to aid them. DIY winch ground anchors are one choice if you don’t have a winch anchor with you.

What is a Winch Ground Anchor?

A large chunk of the wood, spare tire, metal, or sand parachute when put adequately deep in the ground and used as an anchor helping you to lift your car out is known as a winch ground anchor.

The sort of ground you’re trapped in determines how to make a ground anchor for winching. Soft soils will necessitate digging very deep and straight down without any hills. Hard ground is difficult to drill a hole through, however, shallow holes can be used.

Before you try to create a winch ground anchor, try to dig out the earth from the front tires. Then position some form of rubble for friction, move around to develop some momentum so you can push yourself out, or try any other option you can think of.

How to Make a Winch Ground Anchor? – Guide

You will need the following items to create a winch ground anchor:

  1. 2 rounds of stock. (Preferably of 1 inch in diameter)
  2. Mud plate
  3. Gang plate

Now let’s get Started on How you can Build a Winch Ground Anchor.

  1. First and foremost, you must solder an old arp head bolt to one of the steel’s round stock. When you need to pull something, it’ll give you an excellent grasp.
  2. The next step is to drill holes in the gang plate so that you may insert the round stock into the whole when you require the anchor.
  3. A mud plate is an additional option if your terrain is too muddy or soft. That’s all you’ll need to make a winch ground anchor.

How to Use a Winch Ground Anchor?

  1. The first thing you have to do is to dig a hole for yourself. It is easier said than done, especially when you consider the amount of time it will take you to complete this difficult task. Holes can be deeper or shallow which depends on the kind of soil you are functioning with.
  2. Then, you will need a shovel to get started. A shovel with an ergonomic handle and a non slip grip would be a preferable option. This is true for milder ground, however, a pickaxe is preferable if you deal with hard ground. You can use a pickaxe with a rubberized fiberglass grip for more comfort.
  3. When you are digging a hole, set your deadman anchor in the hole, but think about how the cable will flow through the hole to give you linear access to your vehicle. This means you’ll need to dig a trench to allow the cable to run in as straight a line as feasible.
  4. As you proceed further with the digging process, always remember that the anchor you place in the hole will push against the sides of the hole until it achieves the right hold. As a result, dig to a specific depth and straight down, avoiding slopes.
  5. If you are unable to stop your winch line from being tilted towards the ground because the anchor is buried deep within, try laying a rock on which the cable can run to straighten the angle of the draw as much as possible.

Types of Winch Ground Anchor

Lets discuss the types of winch ground anchor in detail.

1. Deadman Earth Anchor

The unusual shape of the Deadman makes it the most versatile off-road recovery anchor, capable of attaching not just to the ground but also around trees and rocks.

Rather than lugging a heavy metal ground anchor, the Deadman transforms into a versatile and reliable winch anchor that can be used in every situation.

You can bury the Deadman to establish an anchor point anywhere you need one when trees or rocks aren’t available. The deadman should be used at a depth of at least two feet.

The capacity of the Deadman is affected by the density of the soil. A deeper hole is advised if the soil is soft (such as sand). A shallower hole will suffice in a hardpack.

2. Spare Tire Anchor

If you do not have a ground anchor, you can use a spare tire as an anchor. For anchoring the cable behind the tire, crowbars are ideal.

Use a strap if one isn’t already present. If you don’t bury it deep enough, the winch will just pull the tire out of the ground.

3. Log Deadman Anchor

Log deadmen are the greatest anchors for large loads. A buried wood with a deadline protruding from its center makes up the deadman. The anchor stakes and ground density must be deep enough for the winch to hold, or else the anchor will be pulled out, posing a risk.

If the deadman is horizontal, it will be more effective. Make sure the standing part of the line begins at the bottom of the deadman, so the deadline is related to the middle of the deadman.

It holds the log in place and prevents it from rotating. Place a small log at the trench’s outflow to keep the deadline from cutting into the ground.

The deadman’s strength is determined by the log’s strength and the earth’s holding power. Place stakes behind each other, away from the line of pull, to maximize your holding strength.

Conclusion

Hopefully, you’ve figured out how to create a winch ground anchor thus far. When making a winch ground anchor, make sure it’s sturdy enough to support the entire load. If you can’t find a tree to the winch, you can pull anything out with an anchor link to the ground. Make sure the anchor you choose is strong enough to support all of the weight you’ll be putting on it.

Leave a Comment